Temperature Selection; Data Storage; Control Panel Lock; Leveling Instructions - Danby DH016A1W Manual Del Propietário

OPERATING INSTRUCTIONS

TEMPERATURE SELECTION

The display screen will show the current internal
temperature of the appliance. The temperature of
the appliance can be set between 2°C - 8°C (36°F
- 46°F). Use the up and down buttons to choose the
desired temperature. Press the Set button to confi rm
the selection.
TEMPERATURE SCALE
Temperature can be displayed in Fahrenheit or
Celsius units. To change the temperature scale, press
the °F/°C button. The current temperature scale will
be shown by the indicator light.

CONTROL PANEL LOCK

The control panel can be locked so that it cannot be
adjusted accidentally.
To set the control panel lock, press and hold the Set
button for fi ve seconds. The display will show "ON"
to indicate that the lock is activated.
To disengage the control panel lock, press and hold
the Set button for fi ve seconds. The display will show
"OFF" to indicate that the lock is disengaged.

LEVELING INSTRUCTIONS

There is an adjustable leg that can be turned up or
down to level the appliance.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the chassis.
2. Slowly turn the leveling leg clockwise until the
appliance is level.

DATA STORAGE

The appliance will record the time and temperature
every 10 minutes and will store this information for
up to 3 years. After three years of functioning, the
data will begin to over write the existing saved data.
The data collected can be downloaded from the
appliance memory by inserting a standard USB
data stick into the USB connection on the control
panel.
When a USB stick is inserted, the display will show
"UP" to indicate that data is being uploaded. It will
alternately display the current internal temperature.
Once the data is uploaded, the display will show
"Ed" and a buzzer will sound to indicate that
the upload is complete. The buzzer will continue
to sound every 5 seconds until the USB stick is
removed. Remove the USB stick and the appliance
will resume normal functioning.
Note: The USB port can not be used for charging
other electrical devices.
4