Changing The Battery - Danby DH016A1W Manual Del Propietário

Ocultar thumbs Ver también para DH016A1W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

CHANGING THE BATTERY

The battery should be replaced every three years.
Ensure that the appliance is unplugged before
replacing the battery.
The change the battery in the appliance, follow the
steps below.
1. Remove the worktop from the appliance.
2. Remove the cover from the electrical control box.
3. Remove the battery from the control board.
Replace the battery with a circular CR3023
battery. Replace the cover of the electrical
control box and the worktop.
1
2
3
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
To change the direction of the door swing, follow
the instructions below.
1. Remove the adjustable foot from the lower right
side of the cabinet. Remove the lower hinge from
the lower right side of the cabinet. Remove the
solid foot from the lower left side of the cabinet.
2. Remove the door from the cabinet. Unscrew the
upper hinge pin from the upper right side of the
worktop and install it on the upper left side of
the worktop.
3. Install the door on the cabinet. Install the lower
hinge on the lower left side of the cabinet. Install
the adjustable foot on the lower left side of the
cabinet. Install the solid foot on the lower right
side of the cabinet. Remove the door handle
from the left side of the door and install it on the
right side of the door.
1
2
3
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dh032a1w

Tabla de contenido