Connecting A Cd Player, Etc. (Aux In Jack); Connecting A Pair Of Headphones (Phones Jack); Connecting The Power Supply - Yamaha DTXPRESS III Manual De Instrucciones

Ocultar thumbs Ver también para DTXPRESS III:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100

■ Connecting a CD Player, etc. (AUX IN jack)

The audio output from a CD player or cassette deck connected to
the AUX IN jack (stereo mini) on the front panel can be mixed
with the sound of the DTXPRESS III and transmitted via the out-
put jacks on the rear panel.
This function is convenient when you want to play along with a
favorite song or enjoy performing with your friends.
The volume of the external signal is adjusted with the AUX IN
VOL knob.
Adjusts the volume of the AUX IN input jack.
Adjusts the volume of the headphones.
■ Connecting a Pair of Headphones
(PHONES jack)
When you want to listen to the DTXPRESS III with a pair of head-
phones, connect the headphones to the PHONES jack (stereo stan-
dard) on the front panel.
The headphone volume is adjusted with the POWER/VOL knob.
When using the headphones, do not damage your hear-
ing. Adjust the volume to a comfortable level.

■ Connecting the Power Supply

A special power source adaptor supplies power to the
DTXPRESS III.
Make sure the power is switched OFF and connect the power adap-
tor to the DC IN jack on the rear panel.
To prevent the cord from becoming unplugged, wrap the cord
around the cord hook and secure.
Use ONLY a Yamaha PA-3C AC Power Adaptor (or
other adaptor specifically recommended by Yamaha).
The use of other adaptors may result in irreparable
damage to both the adaptor and the instrument.
Also, when the DTXPRESS III is not to be used for a
long period of time, please unplug the power adaptor.
Before switching the power ON.
• To protect the speakers, headphones and the
DTXPRESS III from damage, fully rotate the
POWER/VOL knob to the left (minimum volume)
before switching the power ON.
• Make sure the power is switched OFF on all ex-
ternal devices connected to the DTXPRESS III.
After the DTXPRESS III's power is switched ON,
switch the other device's power ON.
Setting Up
cord hook
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dtxpress ii

Tabla de contenido