Connecting An Already-Paired Device Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha R-S202 Manual De Instrucciones

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
Connecting an already-paired
device via Bluetooth
Once pairing has been completed, connecting a Bluetooth
will be easy the next time.
■ Connecting from the Bluetooth device
1
In the Bluetooth settings of the Bluetooth
device, turn Bluetooth on.
2
From the Bluetooth connection list of the
Bluetooth device, choose this unit (R-S202
Yamaha or R-S202D Yamaha).
The Bluetooth connection will be established, and the
front panel display of this unit will indicate
"CONNECTED".
Note
Bluetooth connections cannot be established from the Bluetooth
device when this unit is in standby.
y
You can use the Bluetooth control buttons on the remote control
to control playback (see page 7).
Disconnecting a Bluetooth
connection
If any of the following operations are performed while a
Bluetooth connection is being used, the Bluetooth
connection will be disconnected.
– Switch the audio source other than Bluetooth.
– Press A (power) to set this unit to standby mode.
– Turn off the Bluetooth setting of the Bluetooth device.
14
En