Truvox International Cimex Cyclone CR38 Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Maintenance
WARNING - Before undertaking maintenance operations
or adjustments switch off machine and unplug from the
electricity supply.
IMPORTANT – All other servicing and repairs should only
be performed by a Truvox engineer or Authorised Service
Agent.
IMPORTANT – Should the machine fail to operate please
refer to the fault diagnosis section in the back of this
instruction manual. If the problem/ remedy is not listed
please contact Truvox Customer Service Department for
rapid attention.
The machine requires minimum maintenance apart from
the following checks by the operator prior to use:
• Supply cord - Regularly inspect sheath, plug and cord
anchorage for damage or loose connection. Only
replace the supply cord with the type specified in these
instructions.
• Solution Tank - Check water flow, if restricted inspect
hoses and tubes for blockage or kinks. Dismantle control
valve to clean if necessary.
• Drive backs, pads and brushes - Inspect for wear and
replace worn brushes. Clean under running water.
7. After sales service
Truvox machines are high quality machines that have
been tested for safety by authorised technicians. It is
always apparent that after longer working periods,
electrical and mechanical components will show signs of
wear and tear or ageing. To maintain operational safety
and reliability the following service interval has been
defined: Every year or after 250 hours. Under extreme or
specialised conditions and/or insufficient maintenance,
shorter maintenance intervals are necessary. Use only
original Truvox spare parts. Use of other spare parts will
invalidate all warranty and liability claims. Should you
require after sales service please contact the supplier
from whom you purchased the machine, who will arrange
service. Repairs and servicing of Truvox products should
only be performed by trained staff. Improper repairs can
cause considerable danger to the user.
8. Guarantee
Your product is guaranteed for one year from the date of
original purchase, or hire purchase, against defects in
materials or workmanship during manufacture. Within the
guarantee period we undertake at our discretion, to repair
or replace free of charge to the purchaser, any part found
to be defective, subject to the following conditions:
C
ONDITIONS
1. Claims made under the terms of the guarantee must
be supported by the original invoice/bill of sale issued
at the time of sale, or the machine Serial No.
2. For claims under this guarantee contact the supplier
from whom you purchased the product who will
arrange the appropriate action. Do not initially return
the product as this could result in transit damage.
3. Neither Truvox nor its distributor shall be liable for any
incidental or consequential loss.
4. This guarantee is governed by the laws of England.
5. This guarantee does not cover any of the following:
Periodic maintenance, and repair or replacement
of parts due to normal wear and tear.
Damage caused by accident, misuse or neglect,
or the fitting of other than genuine Truvox parts.
Defects in other than genuine Truvox parts, or
repairs, modifications or adjustments performed
by other than a Truvox service engineer or
authorised service agent.
Costs and risks of transport relating directly or
indirectly to the guarantee of this product.
Consumable items such as, brushes, drive discs,
filters and vacuum skirts.
This guarantee does not affect your statutory
rights, or your rights against the supplier arising
from their sales or purchase contract. Truvox
International Limited policy is one of continual
product development and we reserve the right to
alter specifications without prior notice.
7

Publicidad

Tabla de contenido
loading

Productos relacionados para Truvox International Cimex Cyclone CR38

Este manual también es adecuado para:

Cimex cyclone crs38Cimex cyclone cr48Cimex cyclone cr48 df

Tabla de contenido