Jog Dial Display; Rear Panel - Pioneer DVJ-X1 Manual De Instrucciones

Jog dial display

30. Operation display
Displays play position, with one revolution equivalent to 135 frames. The display rotates
during playback, and stops during pause.
31. Cue point position display
Displays the position of cue points.
32. Audio/video memory status display
Flashes during writing to the audio/video memory; lights steadily when writing is completed.
While indicator is flashing, it may not be possible to record real time cue points or hot cue
points.
33. Jog touch detector indicator
When VINYL mode is set to ON, this indicator lights when the top panel of the jog dial is
touched.
34. VINYL mode indicator (Vinyl)
Lights when VINYL mode is set to ON.

Rear panel

4
NORMAL
CONTROL
5 6
1. POWER OFF (—)/ON (_) switch
2. Main video output connectors (VIDEO OUT)
Includes RCA and BNC type connectors for outputting DVD
playback video only (composite signals), as well as S-Video
output connector.
3. Component video output connectors (Y, C
BNC type connectors for component signal output of DVD
playback video only. Produces higher image quality than com-
posite output.
4. Mode select switch (MODE NORMAL/DJ) ( P.14)
If this switch position is changed during playback, playback
will stop, and then resume playback from the disc's begin-
ning.
DJ: For jog dial, tempo variation and other DJ operations.
During DVD playback, subtitles and some other functions,
operations, or playback points may not be supported.
NORMAL: DJ functions are not supported. Pause mode is
silent, not audible. During DVD playback, selected audio sig-
nals are output from the digital output connectors. During
CD playback, digital data containing subcodes are output (does
not support CD graphics).
5. DIGITAL OUT connector
RCA type coaxial digital output, for connecting AV amplifier,
Dolby Digital/DTS decoder, CD recorder, etc.
When mode selector switch (4) is set to "DJ", during DVD
playback the unit outputs 2-channel linear PCM digital data,
regardless of the selected audio signal format. During CD
playback, the unit outputs only audio data that do not include
subcodes.
3 2
Y C P C P
B B R R COMPOSITE
DJ
MODE
AUDIO OUT VIDEO OUT
DIGITAL
OUT
SYNC IN
L
S
R
S
PREVIEW OUT
7 8 9
/P , C /P
B B R
Before Operating (Names and Functions of Parts) Before Operating (Names and Functions of Parts)
When mode selector switch (4) is set to "NORMAL", dur-
ing DVD playback the unit outputs digital data in the audio
signal format selected. During CD playback, the unit outputs
digital data including subcodes.
6. CONTROL connector
) Using the supplied accessory control cord, this connector can
R
be connected to a Pioneer DJ mixer (DJM-600, DJM-500,
DJM-300, DJM-909, DJM-707 or DJM-3000) to allow control
of this unit from the DJ mixer. This facilitates the use of func-
tions such as fader start play and back cue.
Alternately, linking this connector to another DJ player allows
automatic relay play ( P.40).
7. SYNC IN connector
BNC type input connector for inputting external sync signal.
Use to connect optional dedicated sync signal generator.
8. AUDIO OUT L,R connectors
RCA type analog audio output connectors.
9. Preview video output connectors (PREVIEW OUT)
RCA type connector (composite signals) and S-Video output
connector. These connectors output monitor images used to
aid the DJ during operation. Outputs various guide messages
and displays ( P.12).
10. AC inlet
Use auxiliary power cord to connect to standard electrical
outlet.
31 32
30
33
1
10
<DRB1388> En
34
11