Adjusting Picture Quality - Pioneer DVJ-X1 Manual De Instrucciones

2. Press the ENTER button.
The Picture Quality Controls menu will appear.
Video Memory Select
Video Setup
3. Select [Video Memory Select] and press the
ENTER button.
Standard Cinema Animation
Memory 1 Memory 3
Memory 2
4. Use the four sides of the cursor button (2/3/5/
∞) to select the desired preset picture quality.
Standard:
Reproduces the picture quality recorded on the disc as is.
Cinema:
Optimum for watching in a darkened room, to recreate the
atmosphere of a movie theater.
Animation:
Produces bright, crisp colors, optimum for watching video ani-
mation.
Memory1/Memory2/Memory3:
Favorite picture quality settings can be recorded in memory,
as described in the following section, "Adjusting picture
quality".
5. Press the ENTER button.
The Picture Quality Controls menu will close. If the Picture
Quality Controls menu closes automatically, any set contents
will be canceled.

Adjusting picture quality

1. Use the four sides of the cursor button (2/3/5/
∞) to select [Video2] \ [Video Adjust] \ [Start],
then press the ENTER button.
The Picture Quality Controls menu will appear.
Video Memory Select
Video Setup
2. Use the cursor button's up/down sides (5/∞) to
select [Video Setup] and press the ENTER button.
Video Memory Select
Video Setup
3. Use the cursor button's up/down sides (5/∞) to
select the item you wish to adjust.
Fine Focus On
Move
ENTER Select
When the DISPLAY button is pressed, a submenu list of the
selected adjustment items will be displayed. Press the DIS-
PLAY button once again to return to the previous menu.
Fine Focus On Off
Contrast min
soft
Sharpness
Chroma Level min
Hue green
Memory Off
Fine Focus:
Set to [On] to reproduce high-resolution images.
Contrast:
Use to adjust the ratio between the brightest and darkest parts
of the image.
Sharpness:
Use to adjust the image brightness with respect to the middle
frequency range. This function is disabled when [Fine Focus] is
set to [On].
Chroma Level:
Use to adjust the depth of color. This function is particularly ef-
fective when watching heavily colored animations.
Hue:
Use to adjust the red-green balance (this function is disabled
with component video signals).
4. Use the cursor button's left/right sides (2/3) to
adjust the selected item's level.
When setting [Fine Focus], select between [On] or [Off].
5. Repeat steps 3-4 for all desired setting items.
If you wish to record the selected settings in memory, use
the cursor button's up/down sides (5/∞) to select [Memory],
then use the cursor button's left/right (2/3) sides to select
[1], [2], or [3] to record the combination of settings in the cor-
responding memory space.
• If a combination of settings has previously been memo-
rized in the selected memory space, the previous settings
will be overwritten (erased) by the new settings.
Off
Memory
Move Select
ENTER
6. Press the ENTER button.
The Picture Quality Controls menu will close.
• If the ENTER button is not pressed, the newly modified pic-
ture quality control settings will not be recorded in [Memory].
• The effect of picture quality control changes may not appear
as distinct with some DVDs and on some television sets.
• Picture adjustments are reflected on interlaced output. When
the [Progressive] is selected with [Component Video], pic-
ture adjustments are not applied to the component output.
Preparations (Setup) Preparations (Setup) INDEX
Off
Check
DISPLAY
max
fine
max
red
1 2 3
1 2 3
Check
DISPLAY
<DRB1388> En
25