Using The Equalizer; Recalling Equalizer Curves; Adjusting Equalizer Curves - Pioneer DVH-P7000R Manual De Operación

Audio Adjustments

Using the equalizer

The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display
SUPER BASS
POWERFUL
NATURAL
VOCAL
CUSTOM1, 2
FLAT
• and
CUSTOM1 CUSTOM2
izer curves.
• A separate
CUSTOM1
for each source.
• If you make adjustments when a curve other
than is selected, the equalizer curve
CUSTOM2
settings are memorized in
• A curve can be created common to
CUSTOM2
all sources.
• If you make adjustments when the
curve is selected, the
CUSTOM2
updated.
• When is selected no supplement or
FLAT
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
equalizer curve.
1 Press on the head unit to display the
EQ
equalizer mode.
Equalizer curve
Super bass
Powerful
Natural
Vocal
Custom1, 2
Flat
are adjusted equal-
curve can be created
.
CUSTOM1
CUSTOM2
curve is
and a set
FLAT
2 Press on the head unit to select the
EQ
equalizer.
Press on the head unit repeatedly to switch
EQ
between the following equalizer curves.
—
SUPER BASS POWERFUL
— —
VOCAL CUSTOM1 CUSTOM2

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
.
CUSTOM2
1 Press to select the equalizer mode .
A
Press until
A EQ Low/EQ Mid/EQ High
the display.
• Pressing on the head unit also per-
AUDIO
forms the same operation.
2 Select the equalizer band you want to
adjust with 1 or ¡.
(low)—
EQ Low EQ Mid
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Press E or e to adjust the equalizer
curve.
Each press of E or e increases or decreases
the equalizer curve respectively.
• – is displayed as the equalizer curve is
+6 –6
increased or decreased.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Note
• If you make adjustments when a curve other
than is selected,
CUSTOM2
is updated.
— —
NATURAL
—
FLAT
or
CUSTOM1
appears in
(mid)— (high)
EQ High
curve
CUSTOM1
En
Section
09
63