Installing Brushes/Pads - Tennant T2 Manual De Operador

ENGLISH
5. Check the squeegee blades for proper deflection.
The blades should deflect as shown (Figure 5).
6. To adjust the blade deflection, place the squeegee
assembly on a level surface and adjust the casters
as shown (Figure 6).
5/32"
4 mm
7. When transporting or storing machine, remove the
squeegee assembly and hang it on the storage
bracket (Figure 7).
8
FIG. 5
FIG. 6
FIG. 7

INSTALLING BRUSHES/PADS

FOR SAFETY: Before installing brushes or pad
drivers, stop machine on level surface, remove key
and set parking brake if equipped.
1. Park the machine on a level surface and remove
key.
2. Step down on the scrub head lift pedal to raise the
scrub head off the floor (Figure 8).
3. Attach the pad to the pad driver and secure pad
with centerlock (Figure 9).
4. Turn the brush motor hub until the slot with the
spring clip is visible through the scrub head
window (Figure 10).
FIG. 8
FIG. 9
Spring
Clip
FIG. 10
Tennant T2 (08- -11)