Cleaning The Air Filter - Sony VPL-CX100 Manual De Referencia Rápida

Cleaning the Air
Filter
The air filter should be cleaned whenever
you replace the lamp.
Remove the air filter, and then remove the
dust with a vacuum cleaner.
The time needed to clean the air filter will
vary depending on the environment or
how the projector is used.
1
Turn the power off and unplug the power
cord.
2
Remove the air filter cover.
3
Remove the air filter from the each claws
(7 positions) on the air filter cover.
4
Clean the air filter with a vacuum cleaner.
5
Attach the air filter so that it fits into the
each claws (7 positions) on the air filter
covers.
Note
There is a difference between the front and
rear of the air filter. Attach the air filter
with the grid side facing upward as in the
illustration.
12
GB

Cleaning the Air Filter

6
Notes
• If the dust cannot be removed from the air
filter, replace the air filter with a new one.
For details on new air filter, consult with
qualified Sony personnnel.
• Be sure to attach the air filter cover firmly;
the power can not be turned on if it is not
closed securely.
• To erase a message, press any key on the
control panel of the projector or on the
remote commander.
Claws
Replace the cover.