Checking The Supplied Accessories; Using The Cd-Rom Manuals; Installing Projector Station For Network Presentation - Sony VPL-SW635C Manual De Referencia Rápida

Checking the Supplied Accessories

RM-PJ8 Remote Commander (1)
Lithium battery (CR2025) (1)
The battery is already installed. Before
using the remote commander, remove the
insulation film.
AC power cord (1)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)
Projector Station for Network Presentation
application (CD-ROM) (1)
IFU-PN250A/IFU-PN250B Interactive Pen
Device (2) (VPL-SW635C/SW630C/
SW620C only)
Size AAA (R03) manganese batteries (4)
(VPL-SW635C/SW630C/SW620C only)
USB A-B cable (5m) (1) (VPL-SW635C/
SW630C/SW620C only)
Interactive Presentation Utility 2 application
(CD-ROM) (1) (VPL-SW635C/SW630C/
SW620C only)
10
GB
Checking the Supplied Accessories

Using the CD-ROM Manuals

Insert the supplied CD-ROM into the
CD-ROM drive of your computer, and the
CD-ROM will start automatically in a few
moments. Select the Operating Instructions
you want to read. If the CD-ROM does not
start automatically, open the "index.htm"
file on the CD-ROM.
You must have Adobe Acrobat Reader 5.0
or higher installed in your computer to read
the Operating Instructions stored on the
CD-ROM.
Installing Projector Station
for Network Presentation
1
Close all running applications.
2
Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
3
Open the CD-ROM and run the
executable file that is appropriate for
your OS.
Windows: when the message "User
Account Control" is displayed, click
"Allow" or "Yes."
4
Follow the on-screen instructions to
install the software.