Sony VPL-SW635C Manual De Referencia Rápida página 70

4
Insert the new lamp all the way in until
it is securely in place (1). Tighten the
three screws (2).
5
Close the lamp cover and tighten the
1 screw.
Note
The power will not turn on if the lamp is
not secured properly.
30
GB
Replacing the Lamp
6
Connect the AC power cord to a wall
outlet and turn on the projector.
7
Reset the lamp timer for
the next replacement time.
Select "Lamp Timer Reset" on the
Function menu then press the ENTER
key. When a message appears, select
"Yes" to reset the lamp timer.
Caution
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury.
Disposal of these materials may be
regulated due to environmental
considerations. For disposal or
recycling information, please contact
your local authorities or the
Telecommunications Industry
Association (www.eiae.org).
notification of