Stihl MSE 140 C Manual De Instrucciones página 27

English / USA
9
Fitting the Chain
: Wear work gloves to protect your
hands.
: Fit the chain, start at the bar nose,
pay attention to position of
tensioning gear and the cutting
edges.
: Turn tensioning gear (9) clockwise
as far as stop.
26
10
12
11
: Disengage the chain brake: Push
hand guard (10) toward the front
handle.
: Turn the guide bar so that the
tensioning gear is facing you.
: Fit the chain over the sprocket (11)
and slip the guide bar over the collar
screw (12), the head of the rear
collar screw must locate in the slot.
: Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise as far as stop.
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C