OHAUS Traveler Manual De Instrucciones página 9

Traveler ™ Scales EN-7
4.3. Calibration Lock Feature
Sliding the switch fully to the lock position prevents calibration of the scale. Using a
paper or wire seal will physically secure the switch if required.
Adhesive paper seal
Locking the calibration Wire or plastic tie seal
Figure 4-1. Locking and Sealing the Calibration Lock Switch.
4.4 Weigh Below Feature
The Weigh Below Hook is stored inside the battery cover. Thread the hook into the access
hole at the bottom of the scale. Mount the scale onto an appropriate assembly that allows
free working space below the hook. See Figure 4-2. Note: Never allow the scale to rest
directly on the hook.
Weigh Below Hook access hole
Figure 4-2. Setup for using the Weigh Below Hook.
5. MAINTENANCE
5.1 Troubleshooting
The following table lists common problems and possible causes and remedies. If the
problem persists, contact Ohaus or your authorized dealer.