Using Headphones For Private Listening - Yamaha MDX-596 Manual De Instrucciones

To check the programmed data
1 Press STOP & or PAUSE * to stop or pause
program playback.
2 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
To add a step
1 Press STOP & to stop program playback.
2 Press PROG to enter the program input mode.
3 Press SKIP › repeatedly until "_" is displayed.
4 Use the number buttons to program a new track at
the end of the program.
To delete a specific step
1 Press STOP & to stop program playback.
2 Press PROG to enter the program input mode.
3 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
4 Press DELETE (or DELETE/CANCEL on the
front panel) to delete the step. The higher steps are
renumbered automatically.
To change a step
1 Press STOP & to stop program playback.
2 Press PROG to enter the program input mode.
3 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
4 Use the number buttons to program a new track
number for that step. The original track is cleared
from memory and the new track is programmed.
To cancel
Press STOP & in the stop mode or the program input
mode to turn off the PROGRAM indicator. The program
is erased.
Notes
• If the total time exceeds 255 minutes, "255mOver" is
displayed instead of the total time.
• SKIP $ or › can be used during playback to skip
between programmed tracks.
• SEARCH ⁄ can be used during playback to search
through all tracks in the current program.
• SEARCH ! can be used during playback to return to
the beginning of the current track.
Using Headphones for Private
Listening
Set the PHONES LEVEL knob on the front panel to
"0" (minimum) and insert the headphones plug of your
stereo headphones into the PHONES jack.
To adjust the volume level of the headphones
Use the PHONES LEVEL knob.
Turn toward "10" (maximum) to increase the volume.
Turn toward "0" (minimum) to decrease the volume.
E-11