Titling - Yamaha MDX-596 Manual De Instrucciones

This function lets you title recorded MDs and the
individual tracks. Titles may consist of uppercase and
lowercase letters, numbers, and symbols for a maximum
of up to 250 characters for each title.
DELETE
NATURAL SOUND MINIDISC RECORDER MDX–596
POWER
TIMER
OFF
REC PLAY
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE
2,7
! ?
S/F A–B
&
RNDM PROG
A B C D E F
1 2
P Q R S T U
6 7
SPACE
+10
3
2,7
TITLE CHAR.
SEARCH SEARCH
! ⁄
SKIP
PLAY PAUSE
4
1
To title a disc
Press & (STOP & on the remote) to stop playback.
To title a track
• During stop mode
Use the jog dial (SKIP $ or › on the remote) to
select the track you want to title.
• During playback or pause
Use the jog dial (SKIP $ or › on the remote) to
select the track you want to title, or go directly to step 2 to
title the current track.
During playback, the unit automatically repeats the
selected track while you are entering the title.
• During recording
Go directly to step 2 to title the current track.
Recording continues normally while you are entering the
title for the selected track.
2
Press TITLE to activate the title mode.
The cursor appears in the display.
E-22
SEARCH
! ⁄ &
EJECT
DIGITAL
ANALOG
– +
REC LEVEL REC LEVEL PHONES
CHARA. DELETE EDIT SET SEARCH INPUT
CANCEL ENTER
0 10
3 5 4
DISPLAY SCROLL
REPEAT
– ( )
G H I J K L M N O
4
3 4 5
V W X Y Z /
8 9 0
NUMBER
DELETE
5
NUMBER DELETE SET
M-MARK MONO/ST INPUT
REC
TIME SYNC
STOP REC
CD-P
MDX
STOP &

TITLING

3
Using the front panel
Press CHARA. repeatedly to select between
uppercase letters ("Char = ABC"), lowercase letters
("Char = abc"), and numbers ("Char = 012").
Note : To access the symbols, select "A", then turn the
jog dial to the left.
Using the remote
Press CHAR. repeatedly to select between
REC
uppercase letters (A) and lowercase letters (a).
LEVEL
0 10
4
Use the jog dial (the character buttons or
SKIP $ or › on the remote) to select a
character, number, or symbol.
Example (using the remote):
To select "A", press 1 [ABC] once.
To select "B", press 1 [ABC] twice.
To select "C", press 1 [ABC] three times.
To select "1", press NUMBER, then press 1 [ABC].
5
Press SET to move the cursor into position for
the next character.
6
Repeat steps 3 through 5 to complete your
title.
To delete a character (ABCD = ABD)
1 Use SEARCH ! or ⁄ to move the cursor to the
position of the character you want to delete.
2 Press DELETE.
To insert a character (ABCD = ABTCD)
1 Use SEARCH ! or ⁄ to move the cursor to the
position where you want to insert the character.
2 Use CHARA. and the jog dial (or CHAR. and the
character buttons on the remote) to select the new
character. The character previously in that position
automatically moves to the right.
3 Press SET to set the character.
To insert a space (ABCD = AB CD)
1 Use SEARCH ! or ⁄ to move the cursor to the
position where you want to insert the space.
2 Press +10 [SPACE] on the remote.
7
Press TITLE to exit the title mode.
If a title consists of more than 12 characters, it will scroll
across the display once and then be displayed in
abbreviated form (first 12 characters only).
To undo TITLE
Press & (STOP & on the remote) to display the
1
total tracks and total playing time on the disc.
2 Press EDIT repeatedly to display "Undo Title", then
press ENTER.
"Undo OK ?" appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or &).
After titling
Update the TOC information by using TOC WRITE
function or eject the disc to save changes.