Tabla de contenido
Publicidad
4
selection button for freezer
compartment temperature
(The freezer compartment
temperature can be set from -18 °C
to 24 °C)
Press the button 4 .
The set temperature is indicated on
display 7 for 5 sec.
Press the selection button repeatedly
or continuously until the desired
temperature is displayed.
The value last selected is stored.
5
super" display
Illuminates when super freezing is on.
6
alarm" display
illuminates at the same time as the
warning signal is emitted, i.e. if the
freezer compartment is too warm.
The "alarm" display goes out, when
the freezer compartment has reached
its operating temperature.
7
Temperature display for freezer
compartment
Indicates the current" temperature
for the freezer compartment.
When the selection button 4
is pressed, the set temperature
is indicated for five sec. Then
the "current" freezer compartment
temperature is redisplayed.
8
cold + fresh" display
comes on if the refrigerator and
cool fresh" compartments were
switched on with button 11.
9
Temperature display for
refrigerator compartment
Indicates the current" temperature
for the refrigerator compartment.
If the selection button 10 is pressed,
the set temperature is displayed for
five seconds.
Then the "current refrigerator
compartment temperature"
is redisplayed.
10 Selection button for refrigerator
compartment temperature
(The refrigerator compartment
temperature can be set from +2 °C
to +11 °C)
Press the button 10.
The set temperature is indicated on
display 9 for 5 sec. Press the selection
button repeatedly or continuously until
the desired temperature is displayed.
The value last selected is stored.
11 On/Off button for refrigerator and
cool fresh" compartments
(not all models)
Switches only the refrigerator and
cool fresh" compartments on and
off. These cannot be switched on
unless button 1 was pressed
beforehand.
en
23
Publicidad
Tabla de contenido
