Various Function Selection Programming 1 - Sharp XE-A202 Manual De Instrucciones

A202_3 FOR THE MANAGER
Temporary EJ printing during transaction
• If selecting "enable", you can print journal data of a current transaction recorded in EJ memory by pressing
R
the key during the transaction. To realize this function completely, the cash register must be
programmed to print the receipt and set the Receipt ON/OFF function to OFF.
PGM mode operation records type
• The header information only is printed during the program reading operation.
The header information only is printed for X/Z reports.
(Receipt sample for Header Information only)
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 8th
and 9th positions of the display (EJ memory nearly full message), and the cash register keeps storing new
data while erasing the oldest data. When "0" is selected, the cash register will no longer show EJ memory
nearly full message. When "2" is selected, the cash register shows EJ memory nearly full message and when
the memory is totally full, the cash register locks the sales/data entry with a display of the memory full
message " ". You must issue an EJ report (Z1 report) at this time.
Key operation example
00100002

Various Function Selection Programming 1

3
The cash register provides various detailed functions listed below.
• Function selection for miscellaneous keys
• Print format
• Receipt print format
• Others
For this programming, the job code entry style is applied. You can continue programming until you press the
A
key for the programming described in this section. To continue programming, repeat from a job code
entry.
s
*1 Enter job code using numeric keys specified in each section below.
*2 Data entry details are listed on each table in each section below. An asterisk is entered for factory setting.
Example: When programming for job code 5 as ABCDEFGH: 00000100.
Key operation example
00000100
42
03.7.5 8:08 AM Page 42
s @
68
s A
1
* Job code
s @
5
s A
Print
To set "00000000"
@
2
* ABCDEFGH
Print
s A