Advanced Programming; Register Number And Consecutive Number Programming; Various Function Selection Programming 1 - Sharp XE-A302 Manual De Instrucciones

ADVANCED PROGRAMMING

Register Number and Consecutive Number Programming

1
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
s
Key operation example
Consecutive numbers
s
Key operation example

Various Function Selection Programming 1

2
The cash register provides various detailed functions listed below.
• Function selection for miscellaneous keys
• Print format
• Receipt print format
• Electronic journal (EJ) function parameters
• Function selection for tax
• Others
For this programming, the job code entry style is applied. You can continue programming until you press the
A
key for the programming described in this section. To continue programming, repeat from a job code entry.
48
@
1
Register number (one to six digits)
s @
1
s A
123456
@
A number (one to four digits) that is one
2
s @
2
s A
1000
To set the register number "0"
To begin the count from 0001
less than the desired starting number
s
Print
Register number
s
Print
Consecutive
number
A
A