Aux Source; Starting Procedure; Setting The Video Signal; System Settings - Pioneer AVH-280BT Manual De Instrucciones

AUX source

Hides the touch panel keys.
To display again the keys,
touch anywhere on the screen.
AUX
21
6/10
Full
Switches between the screen to
operate video les and that to
operate music les.
is only available when there are both audio and video
p
files on the auxiliary equipment.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
 External video component and the display on page 35
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.

Starting procedure

You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Confirm that "AUX Input" is turned on.
3 Press .
4 Touch [AUX].
The image is displayed on the screen.

Setting the video signal

When you connect this product to an AUX equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
48
into the AUX input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.

System settings

Displaying the "System" set-
ting screen
1 Press .
2 Touch , and then .
The "System" setting screen appears.
Activating the Bluetooth audio
source
280BT
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 23
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On"
(default) or "Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display while the vehicle is stopped.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 23
2 Touch [Ever Scroll] to switch "On" or "Off"
(default).

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
Camera for Rear View mode
Rear View can be displayed at all times. Please note that with
this setting, the camera image is not resized to fit, and that a
portion of what is seen by the camera is not viewable.
23