Statement Of Use; Noise And Vibration Declaration Statement; Getting Started - Desoutter ELRT025-P4600-10S Manual De Uso

English
Original instructions.
© Copyright 2019, Ets Georges Renault 44818
St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.

STATEMENT OF USE

This product is designed for installing and
removing threaded fasteners in wood, metal and
plastic.
No other use permitted.
For professional use only.
TECHNICAL DATA
● See page 4
Additional data:
Temperature
Humidity ratio
NOISE AND VIBRATION
DECLARATION STATEMENT
See page 92.
Vibration level
Sound level
: Vibration levels.
a , a
hd h
K / K = K = 3 dB : Uncertainty.
pA WA
L : Sound pressure level.
pA
L : Sound power level.
WA
All values are current as of the date of this
publication. For the latest information please visit
www.desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
09/2019
0°C to 40°C
0 / 90 %
work places may be higher. The actual exposure
values and risk of harm experienced by an
individual user are unique and depend upon
the way the user works, the workpiece and the
workstation design, as well as upon the exposure
time and the physical condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can
be found by accessing http://www.pneurop.eu/
index.php and selecting 'Tools' then 'Legislation'.
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modified to help
prevent future impairment.

GETTING STARTED

ELRT tools are to be used with CVIL II controllers
from the Desoutter range. The controller firmware
version must be 5.0 as a minimum.
● Refer to the CVIL II user manual
at http://resource-center.
desouttertools.com (No login/
password required)
The setup will mainly depend on the joint stiffness
and the targeted accuracy.
For example:
Torque
First peak
amplitude
The speed has an impact on the first peak
amplitude.
The pulse amplitude defines the pulse power. It
has an impact on the torque step between two
consecutive pulses.
11 / 96
6159939064_01
Torque step
Time