Ec Declaration Of Conformity - Husqvarna PG 680 Manual De Instrucciones

Noise emissions (see note 1)
Sound power level, measured Lw (dB(A))
Sound levels (see note 2)
Sound pressure level at the operators ear,
Lp (dB(A))
Vibration levels (see note 3)
2
Handle right, m/s
2
Handle left, m/s
Note 1: Noise emissions in the environment measured as sound power (L
60335-2-72.
Note 2: Noise pressure level according to EN 60335-1 and EN 60335-2-72. Reported data for equivalent sound pressure
level for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Vibration level according to EN 60335-1 and EN 60335-2-72. Reported data for equivalent vibration level has a
typical statistical dispersion (standard deviation) of 1 m/s

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel: +46–36–146500, declares under sole responsibility that the floor
grinder Husqvarna PG 820, PG 680 dating from 2016 serial numbers and onward (the year is clearly stated on the type
plate, followed by the serial number), complies with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of February 26, 2014 "relating to electrical equipment designed for use within certain voltage limits" 2014/35/EU.
• of June 08, 2011 on the 'restriction of use of certain hazardous substances' 2011/65/EU.
The following standards have been applied: EN 55014-1:2000+A2:2002, EN 55014-2:1997+A1:2001, EN 61000-3-
2:2000+A2:2005, EN 61000-3-3:1995+A2:2005.
The supplied machine conforms to the example that underwent EC type examination.
Gothenburg 26 February 2016
Joakim Ed
Global R Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
32 – English
TECHNICAL DATA
PG 680
101
82
2,7
4,8
2
.
PG 820
101
82
2,7
4,8
) in conformity with EN 60335-1 and EN
WA