Preventing The Tv From Toppling Over; Support Belt (G); Screw For Support Belt; (M3.8 × 20 Mm) (I) - Sony WS-32SE1B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preventing the TV from toppling over

As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in
serious injury.
Warning
To avoid injury, place the TV Sound Bar System-installed TV less than 25 cm (9 7/8 in) from the
wall, and firmly secure the TV to the wall.
Notes
• Be careful not to pinch your fingers when setting up the TV or rack.
• Install the TV after allowing for a space of less than 25 cm (9 7/8 in) from the wall. The wall will prevent the
TV from falling even if the TV leans backward towards the wall.
When installing the TV on a rack
1
Place the TV on the center of the rack.
2
Fit the support belt (G) to the TV stand, then firmly fasten with the
screw for support belt (+PSW M4 × 10 mm) (H) using a screw driver.
3
Fasten the support belt to the rack with the wood screw for support belt
(M3.8 × 20 mm) (I).
H
I
G
continued
GB
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ws-40se1bWs-46se1b

Tabla de contenido