Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-1183-007.book Page 19 Friday, June 30, 2017 3:12 PM
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more safely.
Symbols and their meaning
Laser Radiation
Do not stare into beam
Class 2 laser product
Do not wear long hair loose.
Do not wear protective gloves.
Do not wear loose clothing or jewel-
lery.
Wear safety goggles.
On/Off switch
Switching Off
Starting the operation of the display
Drilling
Quick Stop
Bosch Power Tools
Symbols and their meaning
Speed Diagram
The diagram provides the speed (rpm) to be set dependent
on the drill bit diameter (Ø in mm) for the materials (Steel)
and (Aluminium).
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
In conjunction with the suitable application tools, the ma-
chine is intended for drilling in wood, metal, and plastic.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Base plate
2 Quick-clamping lever
3 Quick-clamping device
4 Drilling column
5 Rack
6 Speed diagram
7 Clamping lever of the height adjustment
8 Clamping lever of depth stop
9 Depth stop
10 Laser warning label
11 Handwheel
12 Motor unit
13 On/Off switch with Quick-Stop function
14 Display
15 Speed regulator
16 Keyless chuck
17 Tool bit*
18 Mounting holes
19 Parallel guide
20 Wing bolts of the parallel guide
21 Gear selector
22 Illumination and laser unit
23 Hex key (4 mm)
English | 19
1 609 92A 3XK | (30.6.17)
Publicidad
Tabla de contenido
