Editing: Settings For An External Pedal - Boss GT-001 Manual Del Usuario

6

Editing: Settings for an External Pedal

You can control various parameters by connecting an expression pedal (such as Roland EV-5: sold separately) or a
footswitch (FS-5U, FS-6: sold separately) to the CTL/EXP jack on the right panel.
Connecting a pedal
Setting the pedal function
1.
Choose [MENU] " "CTL/EXP" " "CTL1," "CTL2," or "EXP."
Setting Explanation
[CTL1]/[CTL2] This sets the function to be controlled using a footswitch (such as the FS-5U or FS-6: sold separately).
This sets the function to be controlled using an expression pedal (such as the Roland EV-5, FV-500L, or
[EXP]
FV-500H: sold separately).
2.
Set the parameter values with knobs [1]–[4].
For details about assigning functions to external pedals, refer to "Parameter Guide" (PDF file).
Example settings
Switch the patch numbers using CTL1/2 (A/B pedals of the FS-6)
Parameter Value of CTL1 (B pedal) Value of CTL2 (A pedal) Explanation
[1] FUNC NUMBER INC
[2] MIN OFF
[3] MAX ON
[4] MODE TOGGLE
* In addition to the above setting, set "MENU" " "SYSTEM" " "PREF" " "CTL1" and "CTL2" to "SYSTEM. "
Assign the WAH for EXP
Parameter Value
[1] FUNC WAH
* Choose [EFFECT] " ''PEDAL" and turn on the "PEDAL. "
10
* Use only the specified expression pedal (Roland EV-5,
FV-500H, FV-500L; sold separately). By connecting
any other expression pedals, you risk causing
malfunction and/or damage to the unit.
* You can't simultaneously connect both a footswitch
and an expression pedal.
NUMBER DEC
Switches to the next higher patch number using the B
OFF
pedal. Switches to the next lower patch number using
ON
the A pedal.
TOGGLE