Editing: Basic Operation; Choose What You're Going To Edit; Select An Item; Edit The Values - Boss GT-001 Manual Del Usuario

3

Editing: Basic Operation

Editing on the GT-001 is extremely simple. Please take a moment to learn the basic operations.
1

Choose what you're going to edit

Press one of the following buttons.
EFFECT
Here you can edit the parameters
of each effect.
2

Select an item

The procedure below is an example when you press the
[MENU] button.
1.
Rotate the value knob to move the cursor and
choose an item.
2.
Press the [ENTER] button.
3.
Choose another item with the value knob.
4.
Press the [ENTER] button.
The setting for your selected item is displayed.
3

Edit the values

1.
Change the displayed value with knobs [1]–[4].
2.
Press the [EXIT] button a number of times.
You are returned to the Play screen.
In this manual, the order of operations is written as follows.
Example:
Press the [MENU] button.
Rotate the value knob and choose "SYSTEM, " and then press the [ENTER] button.
Rotate the value knob and choose "AUTO OFF, " and then press the [ENTER] button.
Choose [MENU] " "SYSTEM" " "AUTO OFF."
6
MENU
This lets you access output settings, or
let you set the desired functions for
external pedals.
[ENTER] button Value knob