System Settings For The Js-10; Changing The Function Of The Usb Computer Port; Allocating Functions To Footswitches; Backing Up Effect User Patches To An Sd Card - Boss eBand JS-10 Manual De Instrucciones

Convenient Functions

System Settings for the JS-10

You can make a variety of settings for the JS-10 in the SYSTEM
screen .
1.
Follow this sequence of steps: [MENU] button 
"SYSTEM"  [ENTER] button .
The MENU > SYSTEM screen appears .
Switch the page display .
Changing the Function of the USB
COMPUTER Port
Here's how to select the function of the JS-10's USB COMPUTER
port .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "USB MODE"  [ENTER] button .
The USB MODE popup appears .
2.
Specify the setting for USB MODE .
USB MODE Explanation
eBand SONG Select this option when using eBand Song List Editor
LIST EDITOR
(p . 13) .
Select this option when using the JS-10 to listen to PC
AUDIO sound or when using PC software to record the JS-10
sound (p . 27) .
3.
Press the [ENTER] button .
24

Allocating Functions to Footswitches

You can assign functions to pedals connected to the JS-10 .
Refer to "Using Footswitches and Expression Pedals" (p . 30) .
Backing Up Effect User Patches to an SD
Card
You can back up effect user patches saved on the JS-10 to an SD
card .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "PATCH BACKUP"  [ENTER] button .
The PATCH BACKUP screen appears .
2.
Press the [ENTER] button .
The message "Are you sure?" appears .
3.
Press the [ENTER] button to back up the patch .
The effect settings will be backed up .