Husqvarna WS 440 HF Manual De Instrucciones página 5

Ocultar thumbs Ver también para WS 440 HF:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General
The powerful, water-cooled electric motor produces an
impressive 13 kW to the spindle, even though the saw
weighs just 25 kg (55 lbs).
Spindle speed is electronically controlled and adjusted
using the remote control for the power unit.
Short distance between blade and track, for a straighter
cut.
Slip clutch for all movable components.
The blade's direction of rotation can be controlled with the
remote control which allows one to choose the direction of
the water spray.
Equipped with automatic blade brake that stops the blade
within a few seconds.
Complete saw equipment consists of:
One saw
One track 1.2 m + saw carriage
One track 2 m + saw carriage
Four wall mountings
One track holder
One connector
One blade guard 800 or one blade guard 1000
One blade guard guide
One tool kit
One bottle of Husqvarna oil 220
Transport cases for the different units.
Cleaning brush
Screws for flush cutting.
The saw carriage is mounted on both the long and short rails
at the factory to make cutting as easy as possible.
As a large part of the sawing work consists transporting, the
saw equipment is supplied in specially produced cases. The
cases provide good protection during transport and reduced
the number of packages that need to be moved between the
workplaces, which makes the work more effective.
PRESENTATION
– 5
English

Publicidad

Tabla de contenido
loading

Tabla de contenido