Equipping The Torch - Abicor Binzel SR/ABITIG GRIP Instrucciones De Funcionamiento

4 Commissioning
4 Commissioning

4.1 Equipping the torch

1
5
1 Torch body
2 Gas nozzle
Fig. 1 Equipping the torch
EN - 6
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of
maintenance, servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Disconnect the mains plug.
NOTICE
• The commissioning may only be carriedout by authorized personnel
(in Germany see TRBS 1203).
CAUTION
Risk of injury
Through-hole or puncture caused by sharpened electrode.
• Do not reach into the danger zone.
• Wear protective gloves.
Equip the torch neck according to the following figure:
Step 1
4
3 Tungsten electrode
4 Torch cap
Step 2-3 Step 4
3
5
®
SR/ABITIG
2
Collet body
GRIP