Block F5 - Maintenance - Mettler Toledo BTA 221 Manual De Usuario

5.4
08/10 Order number 72244520
The forks must be loaded to the set value before the weight
value is automatically tared.
Factoriy setting 10 d
Possible settings 0 ... maximum load
F1.5.5 – Auto clear tare threshold
This menu item is only available if F1.5.1=On is set.
The forks must be unloaded below the set value before a
new weight value can be tared automatically.
If F1.5.2=On is set, the weighing platform must be unloaded
to the set value before the tare value is cleared automati-
cally.
Factory setting
Possible settings
F1.6.1 – Digital filter
The digital filter stabilizes the weight display when the load
is moving or vibrating.
Lo Low filter
Med Medium filter
HIGH High filter
F1.6.2 – Motion detection
0.5 d Motion detection within +/–0.5 d
1 d Motion detection within +/–1 d
3 d Motion detection within +/–3 d
F1.10 – Resetting parameters 1.x(.x) to factory setting
Reset all F1 parameters to factory setting, except for calibra-
tion values.
Block F5 – Maintenance
Factory settings are printed in bold letters.
F5.1 – Calibration values
F5.1.1 – Show zero-counts
F5.1.2 – Show half load weight value
F5.1.3 – Show half load counts
F5.1.4 – Show full load weight value
F5.1.5 – Show full load weight counts
10 d
0 ... maximum load
METTLER TOLEDO
21
User Manual BTA221