Maintenance; Notes On Cleaning - Mettler Toledo PUA Serie Manual Del Usuario

12

Maintenance

4 Maintenance
Maintenance of the weighing platform is limited to regular cleaning and subsequent oiling
for stainless steel versions.
4.1

Notes on cleaning

NOTICE
Damage to the weighing platform due to incorrect use of cleaning agents.
▲ Use only such cleaning agents that do not act on the plastics used in the weighing
platform.
▲ Only use disinfectants and cleaning agents in accordance with the manufacturer's
instructions.
▲ Do not use highly acidic, highly alkaline or highly chlorinated cleaning agents.
Avoid substances with a high or low pH value, otherwise increased danger of
corrosion exists.
▲ Be particularly careful when cleaning from below (in conjuction with a lifting device).
➜ Remove dirt and deposits at regular intervals from above and below the weighing
platform.
– The procedure depends both on the type of surface and on the environmental
conditions prevailing at the installation location.
– Cleaning from below only in conjunction with a lifting device.
Cleaning in a dry environment (painted version)
➜ Wipe with a damp cloth.
➜ Use household cleaning agents.
Cleaning in a corrosive environment (stainless steel version)
➜ Use a water jet up to 80 °C / 176 °F and max. 80 bars, minimum distance 40 cm.
➜ Remove corrosive substances at regular intervals.
➜ Only use disinfectants and cleaning agents in accordance with the manufacturer's
specifications and instructions.
➜ Check the gap between the weighing platform and the access ramp/wheel set and
remove any soiling.
PUA-series 30290730C