• Hold the voltage tester with the sensor
wire or cable. The voltage tester indicates the strength
of the signal digitally on the LCD screen
Measurement Area Illumination / Torch Light
The voltage tester features a measurement area
illumination by a white LED
under poor lighting conditions (e.g. distribution/control
cabinets). To activate the torch light, press the pushbutton
12
for measurement area illumination. This function Auto
power OFF is approx. 30 seconds after last pressing the
pushbutton
Test probe protector cover
The 2100 series offers you a "Test probe protector cover"
with several functions:
A
storage area for "Test probe - (L1)" and "Test probe +
(L2)" to avoid any injury by penetration.
B
storage area for "4mm Ø test probe extension"
C
storage area for "GS 38 protective probe cap"
D
"Opener-tool" to open UK safety sockets
How to use "Opener-tool" to open UK safety
sockets:
To get access to the live and neutral pin of a UK safety
socket you have to release the safety covers first. This
could be easily done by pressing the "Opener-tool" into
earth pin of the socket.
How to use storage area for "GS 38 protective
probe cap":
1
12
.
B
C
4
. This facilitates work
A
2
10
13
against the
9
.
D
3