Presentation; Dear Customer; Design And Features; Features - Husqvarna DM 220 Manual De Instrucciones

Dear Customer,

Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. A purchase of
one of our products gives you access to professional help with
repairs and services. If the retailer who sells your machine is
not one of our authorised dealers, ask him for the address of
your nearest service workshop.
This operator's manual is a valuable document. Make sure it
is always at hand at the work place. By following its content
(using, service, maintenance etc.) the life span and the
second-hand value of the machine can be extended. If you
will sell this machine, make sure that the buyer will get the
operator´s manual.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles XI
ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for the
engineering skills behind the development of some of the
world's leading products in areas such as hunting weapons,
bicycles, motorcycles, domestic appliances, sewing
machines and outdoor products.
Husqvarna is the global leader in outdoor power products for
forestry, park maintenance and lawn and garden care, as well
as cutting equipment and diamond tools for the construction
and stone industries.
Owner responsibility
It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
National legislation could regulate the use of this machine.
Find out what legislation is applicable in the place where you
work before you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may issue
additional information for safe operation of this product. It is
the owner's obligation to keep up with the safest methods of
operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
For customer information and assistance, contact us at our
website: www.husqvarna.com
4 –
English

PRESENTATION

Design and features

Values such as high performance, reliability, innovative
technology, advanced technical solutions and environmental
considerations distinguish Husqvarna's products. Safe
operation of this product requires the operator to read this
manual carefully. Ask your dealer or Husqvarna should you
need more information.
Some of the unique features of your product are described
below.

Features

Values such as high performance, reliability, innovative
technology, advanced technical solutions and environmental
considerations distinguish Husqvarna's products.
Some of the unique features of your product are described
below.
Softstart™
Softstart™ is an electronic current limiter which provides a
softer start.
Smart Start®
The machine runs at a lower speed when the Smart Start
function is activated. This makes it easier to start drilling the
material.
Elgard™
Elgard™ is an electronic overload protection that protects the
motor. The protection spares the machine and extends its
service life. With the help of Elgard™, the machine indicates
when it approaches maximum load.
Level guiding system
The machine's Level guiding system works like an electronic
level and helps the user to drill in the required position. By
reading the LED indicator on the top of the machine and
adjust it accordingly, it makes drilling easier for the operator
and offers better precision.
Twistable handle
The handle can be fully pivoted around the spindle shaft and
can be locked in any position.
Twistable water/dust nozzle
The nozzle can be turned freely around the spindle shaft and
be locked in any position. The nozzle is connected to a water
source when wet drilling and to a vacuum cleaner when dry
drilling.