Assembling And Adjustments; Assembly - Husqvarna DM 220 Manual De Instrucciones

ASSEMBLING AND ADJUSTMENTS

Assembly

WARNING! The machine should be switched
!
off with the power cable disconnected from
the outlet.
Assembling on stand
• Loosen the screw. Remove the protective cover.
• See instructions in the operator' s manual for the stand in
question.
Fitting/changing the drill bit
CAUTION! The drill bit and the surrounding
!
area is very hot after use. Leave machine to
cool off before removing the drill bit. Use
protective gloves.
• Apply water-resistant grease to the thread of the drill bit.
• Attach the drill bit using the open-ended spanners.
• Before the machine is started, carefully check that the new
bit is firmly attached.
10 –
English
Connect the vacuum cleaner
• Connected the machine to a vacuum cleaner for effective
dust management when dry drilling.