Symbols - RIDGID JP06101 Manual Del Operador

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's
Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
V Volts
A Amperes
Hz Hertz
min Minutes
Alternating Current
n o No Load Speed
Class II Construction
.../min Per Minute
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Failure to keep your hands away from the blade will result in
serious personal injury.
Do not expose to rain or use in damp locations.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits, etc., per minute
DESIGNATION/EXPLANATION
5