Zanussi ZWT 71401 WA Manual De Instrucciones página 23

2. Remove the power supply cable, the draining hose
and inlet hose (if mounted) from the hose holders on
the rear of the appliance.
3. Unscrew and remove the central rear bolt A with the
supplied spanner . Slide out the relevant plastic
spacer.
4. Unscrew and remove the two large rear bolts B and
the six smaller bolts C.
www.zanussi.com
C
5. Remove the bracket D and tighten up the six smaller
bolts C.
D
C
C
B
B
C
23