Adjusting Of The Armpads - Vermeiren EZ1 Manual De Instrucciones

3.8.3 Height of the legrests
Adjust the height of the legrests as follow:
1. Loosen the screw Ⓑ.
2. Adjust the height of the legrest to a comfortable position (range 50 mm: stepless).
3. Tighten the screw Ⓑ properly.
3.8.4 Depth of the legrests
Adjust the depth of the legrests as follow:
1. Loosen the screw Ⓒ.
2. Adjust the depth of the legrest to a comfortable position (range 40 mm: stepless).
3. Tighten the screw Ⓒ properly.
3.8.5 Width of the legrests
Adjust the width of the legrests as follow:
1. Loosen the 2 screws at the rear of the legrest cushion.
2. Adjust the width of the legrest to a comfortable position.
3. Tighten the screws properly.
3.8.6 Folding up the legrests
1. Push on the button Ⓓ.
2. Fold up the legrest.
3. Release the button Ⓓ.
3.8.7 Angle of the footplate
3.8.8 Depth of the footplate
3.9

Adjusting of the armpads

L L L L
CAUTION:
Risk of injury – Check that all the adjustments for both armpads are
placed in an identical position.
Adjust the angle of the footplate as follow:
1. Loosen the black star button Ⓐ.
2. Rotate the footplate to the desired angle.
3. Tighten the star button Ⓐ properly.
Adjust the depth of the footplate as follow:
1. Remove the two screws Ⓐ on the footplate.
2. Adjust the depth of the footplate to a comfortable
position (three positions are possible).
3. Tighten the screws Ⓐ properly.
Page 19
EZ1
2012-12