Adjusting The Anti-Tipping; Height Adjustment; Depth Adjustment; Adjust The Brakes - Vermeiren EZ1 Manual De Instrucciones

3.6

Adjusting the anti-tipping

3.7

Adjust the brakes

L L L L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
Make sure that the anti-tipping is adjusted to
prevent tipping over of the wheelchair.
3.6.1

Height adjustment

1. Loosen the screws
2. Move the anti-tipping in the desired position.
3. Retighten the screws
3.6.2

Depth adjustment

1. Press the spring button
2. Move the anti-tipping in the desired position (3
positions possible).
3. Loosen the spring button
4. Check the spring button
the hole.
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
Page 17
2012-12
.
properly.
.
.
is securely fixated in
so the brake
.
.
EZ1
to