Adjusting Of The Headrest; Maintenance - Vermeiren EZ1 Manual De Instrucciones

3.9.1 Height of the armpad
5
4
2
3.9.2 Depth of the armpad
To adjust the depth of the armpad:
1. Loosen the locking screw
2. Slide the armpad into the required position
3. Retighten the locking screw

3.10 Adjusting of the headrest

L L L L
WARNING:
Risk of injury – Make sure that all screws are tightened securely.
L L L L
WARNING:
Risk of ergonomic injury – Make sure that the headrest is adjusted to
the best comfort of the patient, and no pressure or tension is applied.
2
1
3
1
3.10.3 Depth headrest cushion
The cushion of the headrest can be moved sideways:
1. Loosen the star button
2. Move the headrest cushion in the desired position.
3. Retighten the star button
4

Maintenance

For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.be.
To adjust the height of the armpad:
1. Pull out the locking screw
2. Pull or push the armpad into the required
position
3. Release the locking screw
3
4. Turn the star button clockwise
1
5. Check the armpad is securely fixated.
just below the armpad.
by hand.
3.10.1 Height and depth of the headrest
To adjust the height and depth of the headrest:
1. Loosen the levers
2. Adjust the headrest in the desired position.
3. Retighten the levers
1
3.10.2 Rotation upholstery
To upholstery of the headrest can rotate 360° :
1. Loosen the lever
2. Turn the upholstery in the desired position.
3. Retighten the lever
.
by hand.
Page 20
.
.
.
by hand.
.
by hand.
EZ1
2012-12
.
.
.