Adjusting The Armrests - Vermeiren Inovys II-F Manual De Instrucciones

3.9.4 Adjusting width of the footrest
L
WARNING:
Risk of injury – Make sure that all screws are secure and properly
tightened before using the footrests.
L
WARNING:
Risk of injury – Make sure that the footrests are positioned
symmetrically from the seat.

3.10 Adjusting the armrests

3.10.1 Adjusting depth of the armrests
3.10.2 Adjusting width of the armrests
L
WARNING:
Risk of injury – Make sure that all screws are secure and properly
tightened before using the armrests.
L
WARNING:
Risk of injury – Make sure that the armrests are positioned
symmetrically from the seat.
Adjust the width of the footrest as follow:
1. Remove the bolts Ⓐ for right footrest
and Ⓑ for left footrest on the front of
the seat frame.
2. Adjust the footrest in the desired
position.
3. Retighten the bolts Ⓐ and Ⓑ properly
by hand.
Pull out the footrest socket until the
mark line in the tube (maximum
position).
1. Loosen the fixing screws  beneath
the arm cushion.
2. Remove the nut + spring plunger .
3. Push the arm cushion into the desired
position.
4. Retighten the fixing screws  and nut
+ spring plunger .
1. Loosen the screws  of the armrest
sockets beneath the seat.
2. Pull the armrest socket into the
desired position (max. of 50 mm
outwards).
3. Retighten the screws  firmly by
hand.
Pull out the armrest socket only to
the extent that both screws on one
side still secure the armrest socket.
Page 22
Inovys II-F
2016-05