Adjusting The Armrests - Vermeiren Inovys II Manual De Instrucciones

EN
NL
3.8.4 Adjusting the width of footrest
L WARNING:
tightened before using the footrests.
L
WARNING:
symmetrically from the seat.
3.9

Adjusting the armrests

3.9.1 Depth adjusting of armrests
3.9.2 Width adjusting of the armrests
L WARNING:
tightened before using the armrests.
L
WARNING:
symmetrically from the seat.
Risk of injury – Make sure that all screws are secure and properly
Risk of injury – Make sure that the footrests are positioned
Risk of injury – Make sure that all screws are secure and properly
Risk of injury – Make sure that the armrests are positioned
Adjust the width of the footrest as follow:
1. Remove the bolts Ⓐ for right footrest
and Ⓑ for left footrest on the front of
the seat frame.
2. Adjust the footrest in the desired
position.
3. Retighten the bolts Ⓐ and Ⓑ properly
by hand.
Pull out the footrest socket only to the
extent that both screws on one side
still secure the footrest socket.
1. Loosen the fixing screws  beneath
the arm cushion.
2. Remove the nut + spring plunger .
3. Push the arm cushion into the desired
position.
4. Retighten the fixing screws  and nut
+ spring plunger .
1. Loosen the screws  of the armrest
sockets beneath the seat.
2. Pull the armrest socket into the
desired position (max. of 50 mm
outwards).
3. Retighten the screws  firmly by
hand.
Pull out the armrest socket only to
the extent that both screws on one
side still secure the armrest socket.
Page 20
Inovys II
2011-11