Setting The Register Number And Consecutive Number; Programming The Tax Rate - Sharp ER-A220 Manual De Instrucciones

Setting the register and consecutive number
2
Setting the register number
When your store has two or more registers, it is practical to set separate register numbers for their identification.
You may set them in a maximum of six digits.
Ñ 1
Key operation example
Setting the consecutive number
The consecutive number is increased by one each time a receipt is issued.
Enter a number (one to four digits) that is one less than the desired starting number.
Ñ 2
Key operation example

Programming the tax rate

3
Ñ 9 ≈
*1: Enter a corresponding tax rate number. For example, when you program a tax rate as tax rate 1, enter 1.
*2: Sign and tax rate: XYYY.YYYY
*3: Max. five digits: 0.00 to 999.99
To set the register number "0"
≈
Register number (one to six digits)
Ñ ≈
1
Ñ É
123456
To begin the count from 0001
≈
A number (one to four digits) that is one
less than the desired starting number
Ñ ≈
2
Ñ É
1000
≈
A
1
*
1-4
Tax rate= 0.0001 to 100.0000
-
1
Sign / = /
+ 0
To program "0"
2 ≈
* Sign and
tax rate
?
To innibit this tax rate
Ñ É
Print
Ñ
Print
To program "0"
3 Ñ É
* Lowest taxable
amount
Register number
É
Consecutive
number
9