Folding Frame - EMAK Oleo-Mac Cheyenne 92 Manual De Uso

(10) Motor hours counter
SenDEC
8
HOURS
Tampering with the counter will void the warranty – the motor hours connection is
equipped with a tamper seal.
Immediately contact your service centre if the motor hours counter malfunctions.

(11) Folding frame

The folding frame is intended to prevent the machine from rolling over by 180° if for any reason it loses
stability and rolls on to its side. The folding frame has 2 positions:
Under no circumstances is it permitted to demount the machine's protective
frame!
The motor hours counter implicitly displays the total number of motor
hours. By pressing the Mode button you gradually switch between the
following maintenance functions:
TMR 1
OIL CHG
AIRFILTER SVC
Mode
Two hours before the set interval has elapsed the display will show
a message lasting 10 seconds.
After the interval has elapsed the display will show a message NOW.
Any of the above mentioned alarms can be reset by holding down the Mode
button for 6 seconds.
- individual trip counter. The value is reset by holding
down the Mode button for 6 seconds.
- oil change. The function has two oil change intervals.
The first is after 5 hours (oil change after the motor
has run itself in) and is shown only once. The second
is after 25 hours (standard oil change).
- cleaning or changing the oil filter. The interval is set to
50 hours.
(1) Working
Always use this position during work and when
travelling to/from the work location.
(2) Auxiliary for handling the machine
To tilt the frame, first take the cotter pins out of
the pins, remove the pins and tilt the top part
of the frame downwards. Reinsert the pins and
secure in place with cotter pins.
79