Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLUTCH
Clutch adjustment may be required if the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Minor adjustments can be made with the
clutch cable adjuster ( ) at the lever ( ).
Normal clutch lever free play is:
10 20 mm (0.4 0.8 in)
−
−
(1)
(1) Clutch lever
18
4
1
1.
Pull back the rubber dust cover ( ).
2.
Loosen the lock nut ( ) and turn the
adjuster ( ). Tighten the lock nut ( )
4
and check the adjustment.
3.
If the adjuster is threaded out near its
limit or if the correct free play cannot be
obtained, loosen the lock nut ( ) and turn
in the cable adjuster ( ) completely.
Tighten the lock nut ( ) and install the
dust cover.
(3)
(2) Dust cover
(3) Lock nut
(4) Adjuster
2
3
3
3
4
3
(2)
(A)
(
(
B
B
)
)
(4)
(A) Increase free play
(B) Decrease free play
Publicidad
Tabla de contenido
