Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Check rear axle alignment by making
sure the chain adjuster index marks ( )
align with the rear edge ( ) of the
adjusting slots.
Both left and right marks should
correspond. If the axle is misaligned, turn
the left or right adjusting nut until the
marks correspond on the rear edge of the
adjusting slots and recheck chain slack.
If the drive chain slack is excessive when
the rear axle is moved to the furthest limit
of adjustment, the drive chain is worn and
must be replaced.
6.
Torque the rear axle nut to:
93 N·m (9.5 kgf·m , 69 lbf·ft)
7.
Tighten the adjusting nuts lightly, then
tighten the lock nuts by holding the
adjusting nuts with a spanner.
8.
Recheck drive chain slack.
9.
Rear brake pedal free play is affected
when repositioning the rear wheel to
adjust drive chain slack. Check rear brake
pedal free play and adjust as necessary
(page
16
).
72
4
5
Publicidad
Tabla de contenido
