Section Viii. Care Ofyour Machine Replacing The Light Bulb; Cleaning The Bobbin Holder - Sears Kenmore 385.18221 Manual De Instrucciones

SECTION VIII. CARE OFYOUR MACHINE F
NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained
in this section.
* Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight.
* Clean the outside of the machine with a soft cloth and
mild soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could be HOT, protect your fingers when
you handle it.
Unplug the machine and open the face cover. Pull out the
bulb from the socket. Insert the new bulb into the opening of
the socket. Close the face cover.
Cleaning the Bobbin Holder
[] To insure that the machine operates at its best, you need
to keep the bobbin area clean at all times.
Turn off the power switch and unplug the machine.
Remove the hook cover plate by sliding the hook cover
plate release button to the right.
[] Take out the bobbin. Brush out dust and lint with a lint
brush or a vacuum cleaner.
[] Insert the bobbin and attach the hook cover plate.
[]
[]
I I I
I , Ii1
J
_ J
92