To Drop Or Raise The Feed Dogs; Button Sewing; Overcasting With Zigzag Stitch - Janome Hello Kitty 18750 Manual De Instrucciones

q
q
w
w e
q
r
q w e
w
e
48
To Drop or Raise the Feed Dogs
The drop feed lever is located underneath the free arm
bed on the back of the machine.
q To drop the feed dog, push the lever in the direction
of the arrow q.
w To raise the feed dog, push the lever in the direction
of the arrow w, as illustrated, and turn the handwheel
e toward you. The feed dog must be up for normal
sewing.
Button Sewing
Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Feed dog:
1. Drop the feed dogs. Place the button under the foot,
making sure to align the holes with the horizontal
slot in the foot. Lower the presser foot to hold the button
in place.
2. Determine which stitch width setting matches the
distance between the button holes. The needle must go
safely through each hole when sewing.
Unthread the needle to help you determine the zigzag
width.
3. Thread the needle. Turn the handwheel, so that the
needle is in its leftmost position, and then drop the
needle through the right buttonhole.
4. Start the machine and sew about 10 stitches.
5. Sew the other row of holes (if applicable) using the steps
above. Trim excess threads from both sides of the fabric.
Overcasting with Zigzag Stitch
Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
This stitch is useful in garment construction, and in finishing
raw edges of any sewing project.
Carefully guide the fabric so the needle falls off the edge
when it swings to the right.
10
3 to 6
Satin stitch foot: F
Dropped
10
3 to 6
Zigzag foot: A