GENERGY SILENT Serie Instrucciones De Uso página 78

5 Turn the "ATS MODE" switch in "ON" (automatic mode).
The generator is on alert and ready to start in case of a power failure.
To check the correct operation you can simulate an outage:
Cut off energy in "POWER INLET 230V".
1 The generator will begin the process of start up and it will start up.
2 After about 20 seconds 230V will be restored in "POWER OUTPUT" thanks to
the power generator.
3 Now simulate the return of the power network, to do so, feed "POWER ENTRY"
again. After a few seconds the generator will stop remaining at rest.
If you have any questions, please contact us at sat@sg-group.es
75