Changing Or Installing A New Saw Blade - DeWalt DW714 Manual De Instrucciones

ENGlIsH
Fig. F

Changing or Installing a New Saw Blade

(Fig. G–J)

WARNING: To reduce the risk of serious personal
injury, turn off the tool and disconnect it from
the power source before attempting to move it,
change accessories or make any adjustments.

CAUTION:
• Never depress the spindle lock button while the
blade is under power or coasting.
• Do not cut ferrous metal (containing iron or steel)
or masonry or fiber cement product with this
miter saw.
• Depress the head lock up release lever
equipped) to release the lower guard
the lower guard as far as possible.
• Always choose the correct blade for material
being cut.
Fig. G
29
2
Removing the Blade (Fig. H–J)
1. Unplug the saw.
2. Raise the arm to the upper position and raise the lower
guard as far as possible.
3. Loosen, but do not remove guard bracket screw
until the bracket can be raised far enough to
38
access the blade screw 40
50
10
29 (if
2 ,then raise
37
(Fig. J). Lower guard will
remain raised due to the position of the guard bracket
screw 37 .
Fig. H
4. Depress the spindle lock button
rotating the saw blade by hand until the lock engages.
5. Keeping the button depressed, use the other hand and
the wrench provided to loosen the blade screw
9
(Turn clockwise, left-hand threads)
6. Remove the blade screw, outer clamp washer
blade 41 . The inner clamp washer
the spindle.
Fig. I
24
37
38
24 while carefully
40
, and
42
44 , may be left on
40
9
.