Abicor Binzel DAV Guia De Instalacion página 41

DAV
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
When disposing of the system, local regulations, laws, provisions, standards
and guidelines must be observed. To correctly dispose of the product, it must
first be disassembled.
 11 Disassembly on page EN-18
This product is mainly made of metallic materials which can be melted in steel
and iron works and are, thus, almost infinitely recyclable. The plastic materials
used are marked in preparation for their sorting and separation for later
recycling.
Oil, greases and cleaning agents must not contaminate the ground or enter the
sewage system. These substances must be stored, transported and disposed of
in suitable containers. Please observe the relevant local regulations and
disposal instructions in the safety data sheets specified by the consumables'
manufacturer. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the consumables'
manufacturer.
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. The ability to recycle packaging materials is always considered
during their selection.
12 Disposal
EN - 19